EIFS - Finestone Systems from Architectural Fabricators Company, Inc.

Fancy Pillars - created with Finestone from AFC

Distinctive Natural Exteriors
by FINESTONE

Architectural Fabricators Company, Inc. is your Finestone headquarters for the ultimate in exterior and interior wall surfacing systems.

Man and nature can really punish an exterior finish and with FINESTONE EIF systems you have the best protection from both.

FINESTONE has a high acrylic content that is the key to durable, long-lasting finishes. FINESTONE finishes are formulated using the finest 100% pure acrylic polymers, but never vinyls. This is the very reason why FINESTONE materials trowel easier, look better and last longer than others.


PEBBLETEX: Finestone's textured finishes are available in 7 standard surface treatments: Mojave, Finetex, Natural Swirl, Medium, CSL 1.5, Limestone and Sand Spray. We offer 64 standard colors and if those are not enough, we can match most colors on a custom order basis.
FINEMIST: is Finestone's smooth-textured surface treatment. This product is factory mixed with colored ceramic beads that give this finish a luxurious custom look and feel. We use only 100% pure acrylic-based polymers.

FINESTONE ELASTOMERIC FINISHES: Stucco and other cementitious wall surfaces are certain to crack over time. Surfacing or resurfacing with Finestone Elastomerics can solve these cracking problems, by coating the wall with a high-elastic surface which can be either smooth or textured. This high elasticity allows normal building movement to occur without surface cracking.

Aggrelastic textured elastomeric finishes are available in 7 standard surface treatments (all Pebbletex textures). Series 100 - standard elasticity and Series 200 - enhanced elasticity. Finelastic smooth elastomeric finishes are available in two formulations: Series 200 standard elasticity and Series 600, which maintains an elongation factor of 600%--the highest in the industry!

Use Fineshield Additives for the ultimate in weather protection:

SRS (Soil Resistance Surface). This polymer enhancement creates a harder surface, more resistant to weather. Special agents close up surface pores, leaving less room for dirt and mildew to accumulate.
Maximum A/S (Maximum Protection - acrylics and silicone). This state-of-the-art silicone technology makes water bead up on building surfaces. As the water runs off, it carries dirt and mildew particles away with it. Buildings look much better and last longer.
X-L (Excels at mildew protection). For use in high humidity, X-L keeps mildew from establishing itself. Its fungistatic compound incorporates itself into the polymer matrix. It won't migrate, so mildew proetection lasts and lasts . . . maintaining a better appearance for the life of the building.

CONTACT AFC today and let our expert staff consult with you on your next project.

Since 1983, AFC has provided quality fabrication and painting services to the construction industry. We work closely with each owner, architect and contractor. We design our services to meet the unique needs of the customers we serve. Let us show you all the ways we can help you save time and money AND improve your product and your profits!

Architectural Fabricators Company, Inc.
1034 NE Washington Blvd., Bartlesville, OK 74006
(800)942-8672 Fax: (918)331-0626 Email: afc@arcfab.com